The bottom part of the top piece of my pre-lit tree went out. These lights are wired in parallel, so if one goes out, the others stay lit. The whole top section is on the same strand and I've checked every single bulb in the bottom part that is out and they are all securely in the socket. I've even checked the fuses, although the top of the strand is still lit. If I remove one bulb, the whole strand goes out. If I replace a bulb in the section that is out with one I've already tested, the section still stays dark. It doesn't make sense. I don't know what else to do. Any suggestions?
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!
You say that you have checked the fuses but sometimes these are difficult to judge whether they are working correctly.
Be sure you are checking all of the fuses - check your instructions.
I have read lots of this type question and it seems to get more confusing and not much solving.
I would say to find your instructions/tag on tree/register receipt and contact the manufacturer as they can tell you more about your lighting than anyone. Companies are usually very helpful and may even replace the lights for free.
If you cannot find the manufacturer name then try to remember the store where purchased. If you have only had it for less than 2-3 years the store will probably help you.
You can also ask your questions on some of the forums but I could not find very many listed.
askinglot.com/
talk.newagtalk.com/
www.diychatroom.com/
blog.treetopia.com/
www.christmaslightsetc.com/
Sorry, this is all that I can suggest but usually someone on the forums can help.
Thank you, I will check all of them and take it from there.
+I myself am having trouble with my tree in the same manner. All my lights are good on top of the fuses checked everything, No go. Ive read so many problems and no help from company.
Add your voice! Click below to answer. ThriftyFun is powered by your wisdom!